Dura-Film® Winterguard


4-mil performance in a 3-mil overwintering film.
Download Winterguard Brochure - PDF
AT Films has developed the most advanced polymer blend available for our Dura-Film Winterguard products. These films are truly a new generation of overwintering protection. Since AT Films introduced this super strength overwintering film in 1997 thousands of growers, all over North America, have successfully switched from traditional 4-mil overwintering products to our 3-mil Dura-Film Winterguard film. This new 3-mil film has much better tear strength, stronger folds and takes greater energy to puncture than the 4-mil 'co-poly' that are currently available! Dura-Film Winterguard is also 25% lighter than standard 4-mil co-poly -- that's 25% less weight during installation and 25% less film to dispose of next spring.
When an even tougher film is required, Dura-Film Winterguard is also available in super strong 5-mil gauge.
Dura-Film Winterguard is available in a wide selection of stock sizes.
The following minimums apply for custom Dura-Film Winterguard products:
- For widths of 20' or less, a minimum of 2,000 lbs per order, per width, per gauge and per opacity is required
- For widths greater than 20', a minimum of 5,000 lbs per order, per width, per gauge and per opacity is required
Product Specifications
|
Gauge |
UV Stabilized? |
Warranty? |
Anti-Condensate? |
Thermal? |
White Opacity? |
Diffusion? |
|
3 mil |
NO |
No |
NO |
NO |
YES |
Not Applicable |
Stock Sizes
|
Product Code (CPC) |
Product Description |
Rolls/Pallet |
|
5550408 |
24X100 - 3 mil - high |
30 |
|
5550407 |
32X100 - 3 mil - high |
30 |
|
5550469 |
32X150 - 3 mil - high |
20 |
|
5550406 |
40X100 - 3 mil - high |
24 |
|
Specifications |
|||
|
Property |
Typical Value |
Unit |
Test Method |
|
Gauge |
|||
|
Specified |
3.0 |
mil |
AT Method |
|
Optical |
|||
|
Opacity |
Medium(target 55) |
% |
ASTM D 1003 |
|
|
High(target 70) |
% |
ASTM D 1003 |
|
Tensile: MD |
|||
|
Max. Stress |
39 |
MPa |
ASTM D 882 |
|
Max. Load |
72.2 |
N |
ASTM D 882 |
|
Elongation |
667 |
% |
ASTM D 882 |
|
Tensile: TD |
|||
|
Max. Stress |
36.6 |
MPa |
ASTM D 882 |
|
Max. Load |
72.2 |
N |
ASTM D 882 |
|
Elongation |
740 |
% |
ASTM D 882 |
|
Tear |
|||
|
MD |
7.4 |
N |
ASTM D 1922 |
|
TD |
20.2 |
N |
ASTM D 1922 |
|
Dart Impact |
|||
|
F(50) Fold |
270 |
g |
ASTM D 1709 |
