Dura-Film® Winterguard
4-mil performance in a 3-mil overwintering film.
AT Films has developed the most advanced polymer blend available for our Dura-Film Winterguard products. These films are truly a new generation of overwintering protection. Since AT Films introduced this super strength overwintering film in 1997 thousands of growers, all over North America, have successfully switched from traditional 4-mil overwintering products to our 3-mil Dura-Film Winterguard film. This new 3-mil film has much better tear strength, stronger folds and takes greater energy to puncture than the 4-mil 'co-poly' that are currently available! Dura-Film Winterguard is also 25% lighter than standard 4-mil co-poly -- that's 25% less weight during installation and 25% less film to dispose of next spring.
When an even tougher film is required, Dura-Film Winterguard is also available in super strong 5-mil gauge.
Dura-Film Winterguard is available in a wide selection of stock sizes.
The following minimums apply for custom Dura-Film Winterguard products:
- For widths of 20' or less, a minimum of 2,000 lbs per order, per width, per gauge and per opacity is required
- For widths greater than 20', a minimum of 5,000 lbs per order, per width, per gauge and per opacity is required
Product Specifications
| Product Specifications | |||||||
| Gauge | UV Stabalized | Warranty | Anti Condensate? | Thermal? | White Opacity? | Diffusion? | |
| 3 mil | NO | NO | NO | NO | YES (medium or high) |
Not Applicable | |
Stock Sizes
| Product Code (CPC) | Product Description | Rolls/Pallet |
| 5550408 | 24X100 - 3 mil - high | 30 |
| 5550407 | 32X100 - 3 mil - high | 30 |
| 5550469 | 32X150 - 3 mil - high | 20 |
| 5550406 | 40X100 - 3 mil - high | 24 |
| Specifications | |||
| Property | Typical Value | Unit | Test Method |
| Gauge | |||
| Specified | 3.0 | mil | AT Method |
| Optical | |||
| Opacity | Medium(target 55) | % | ASTM D 1003 |
| High(target 70) | % | ASTM D 1003 | |
| Tensile: MD | |||
| Max. Stress | 39 | MPa | ASTM D 882 |
| Max. Load | 72.2 | N | ASTM D 882 |
| Elongation | 667 | % | ASTM D 882 |
| Tensile: TD | |||
| Max. Stress | 36.6 | MPa | ASTM D 882 |
| Max. Load | 72.2 | N | ASTM D 882 |
| Elongation | 740 | % | ASTM D 882 |
| Tear | |||
| MD | 7.4 | N | ASTM D 1922 |
| TD | 20.2 | N | ASTM D 1922 |
| Dart Impact | |||
| F(50) Fold | 270 | g | ASTM D 1709 |